Connect with us

Space

Men behind India’s Chandrayaan-3 mission

Published

on

Happy ISRO officials moon landing
Happy ISRO officials moon landing

Chennai, Aug 23 (IANS) They were all men in the Chandrayaan-3 mission and they were confident of soft landing the country’s moon lander on the lunar soil, a ‘Mission Possible’ after the failure of Chandrayaan-2.

Incidentally, unlike the Chandrayaan-2 mission, where a couple of women were in a lead role — with Project Director M. Vanitha and Mission Director Ritu Karidhal Srivastava — this time around it was an all male club.

In Chandrayaan-3, the Mission Director was Mohan Kumar and the Vehicle/Rocket Director was Biju C. Thomas.

“There are about 54 female engineers/scientists who worked directly in the Chandrayaan-3 mission. They are associate and deputy project directors and project managers of various systems working at different centres,” a senior official of Indian Space Research Organisation (ISRO) had told IANS preferring anonymity.

Well, the Men in Chandrayaan-3 are as follows:

Dr. S. Somanath, Chairman, ISRO

Most of the Hindu names signify a God. In the case of S. Somanath, Chairman, Indian Space  Research Organisation (ISRO), the name means Master of the Moon.

Incidentally, it was his responsibility to see India’s moon lander soft lands successfully on Wednesday evening.

As a young engineer, Somanath dared to set right an anomaly along with two of his seniors in a Polar Satellite Launch Vehicle (PSLV) that was ready for a takeoff.

Normally in such a situation, the rocket launch would have been postponed, draining the fuel and other laborious processes. The other option was trying to set the problem right, when the rocket is fueled up-a risky proposition.

However, the three brave officials including the young Somanath set right the problem. The rocket lifted off safely and made the mission a success.

Nearly two decades later, as the head of ISRO, Somanath seems to have set right the issues that resulted in the crash landing of India’s first moon lander called Vikram.

ALSO READ:  Prez, V-P congratulate nation on successful Chandrayaan-3 landing

Son of a Hindi teacher, Somanath was interested in science. Later he pursued B.Tech in Mechanical Engineering but had an active interest in rocketry.

Like a dream come true, in 1985 Somanath got a job with ISRO and joined the Vikram Sarabhai Space Centre (VSSC) in Thiruvananthapuram, which was responsible for rockets.

Somanath took his B. Tech in Mechanical Engineering from TKM College of Engineering, Kollam and Masters in Aerospace Engineering from Indian Institute of Science, Bangalore with specialisation in Structures, Dynamics and Control.

Rising up the ranks, he joined GSLV MkIII Project during 2003 and was the Deputy Project Director responsible for overall design and integration of India’s heaviest and most powerful rocket. He was the Project Director of GSLV Mk-III (now LVM-3) from June 2010 to 2014.

Somanath also led the team of LPSC (ISRO’s Liquid Propulsion Systems Centre) to complete the development and qualification of CE20 cryogenic engine and the C25 stage, which was successfully flown in GSLV MkIII-D1 flight.

Prior to becoming ISRO Chairman, Somanath headed VSSC as its Director.

Dr. S. Unnikrishnan Nair, Director, Vikram Sarabhai Space Centre

He is a Distinguished Scientist heading the Vikram Sarabhai Space Centre (VSSC) – India’s rocket centre – as well as a Malayalam short story writer.

Dr. S. Unnikrishnan, is a B.Tech in Mechanical Engineering from Kerala University, ME in Aerospace engineering from the Indian Institute of Science, Bengaluru and a doctorate in  Mechanical Engineering from Indian Institute of Technology-Madras.

That apart, he also holds an MA in Telecommunications and Space Law from NALSAR, Hyderabad.

Unnikrishan began his career in VSSC in 1985 and was involved in the development of various aerospace systems and mechanisms for Indian rockets – PSLV, GSLV and LVM3.

He played a key role in the maiden orbital re-entry experiment, Space Capsule Recovery Experiment (SRE), right from the study phase onwards to its mission accomplishment in 2007.

ALSO READ:  Union cabinet lauds success of Chandrayan-3 mission, appreciates role of ISRO

He was associated with Human Spaceflight Programme from its study phase since 2004 and was the Project director for Pre-project technology development activities.

Unnikrishnan led the project team for defining the Vehicle configuration, Systems engineering and in identifying various critical technology development areas to initiate the pre-project activities.

As founding Director of the youngest Centre in ISRO, the Human Space Flight Centre (HSFC) Unnikrishnan has led the team for Gaganyaan Project and established the Astronaut Training Centre at Bangalore in HSFC at Bangalore.


Dr. P. Veeramuthuvel, Project Director, Chandrayaan-3

Son of a railway employee, Dr. P. Veeramuthuvel always aimed for the skies. Hailing from Tamil Nadu’s Villupuram district, Veeramuthuvel completed his Diploma in Mechanical Engineering and went on to get a Degree in Engineering. Later he did his PhD at IIT-Madras. He joined ISRO in 2014.


M. Shankaran, Director, U R Rao Satellite Centre

A Distinguished Scientist M. Shankaran took over as Director of U R Rao Satellite Centre (URSC), the lead Centre in the country for design, development and realisation of all satellites of ISRO, on June 1, 2021.

He is currently leading satellite fraternity to realise various types of satellites to meet the national requirements in the areas like communication, navigation, remote sensing, meteorology and inter-planetary exploration.

During his 35 years of experience in URSC/ISRO, he has contributed primarily in the areas of Solar arrays, Power systems, Satellite Positioning System and RF communication systems for Low Earth Orbit(LEO) Satellites, Geostationary Satellites, Navigation Satellites and Outer Space Missions like Chandrayaan, Mars Orbiter Mission (MOM) and others.

He is now leading the efforts to the miniaturisation of avionics systems, indigenisation of electronics & power system components, micro/mini satellite bus development and others. He is also spearheading the avionics system design, realisation and qualification for the Gaganyaan Programme.

ALSO READ:  ISRO team travels to Tirumala before Chandrayaan-3's launch

He joined the ISRO Satellite Centre (ISAC), currently known as URSC after obtaining his Master’s degree in Physics from Bharathidasan University, Tiruchirappalli in 1986.


Dr. V. Narayanan, Director, Liquid Propulsion Systems Centre

He is the man providing the propulsion power to Indian rockets. Dr V.Narayanan, an Alumni of Indian Institute of Technology- Kharagpur and has taken his M.Tech with First Rank in Cryogenic Engineering in 1989 and Ph.D in Aerospace Engineering in 2001.

A rocket propulsion expert Narayanan joined ISRO in 1984 and functioned in various capacities before becoming Director of the Centre. As Project Director for C25 Cryogenic Project, he led the team and successfully developed C25 Cryogenic Stage.

When India was denied the complex Cryogenic Propulsion Technology for GSLV Mk-II vehicle, Narayanan played a crucial role in the successful development of Cryogenic Upper Stage (CUS) and contributed in making it operational for the GSLV Mk II vehicle. 

He has guided the team and designed a 200-tonne thrust Lox-Kerosene Semi Cryogenic Rocket Engine.

During the initial period from 1984 to 1988 in ISRO, he also contributed to the Solid Propulsion System realisation for launch vehicles. As Associate Director of LPSC, he was guiding the liquid propulsion activities of ISRO and was instrumental in finalising the Liquid Propulsion Roadmap of ISRO for the next 20 years.


A.  Rajarajan, Director, Satish Dhawan Space Centre

He first joined the India’s rocket centre – Vikram Sarabhai Space Centre (VSSC) and over the years risen through the ranks and is now heading the Satish Dhawan Space Centre (SDSC) that provides the solid fuel for the rocket and also the country’s rocket port in Sriharikota in Andhra Pradesh.

Space

NASA spacecraft spots Moon crater likely caused by Russia’s Luna 25

Published

on

By

Luna 25 Impact Moon crater
Luna 25 Impact Moon crater

Washington, Sep 1 (IANS) US space agency NASA on Friday said that its Lunar Reconnaissance Orbiter (LRO) spacecraft has imaged a new crater on the Moon’s surface that is likely the impact site of Russia’s Luna 25 mission.

Luna-25, which  took off atop a Soyuz-2.1b rocket from the Vostochny launch facility in Russia at 2.10 a.m. Moscow time (4.40 a.m. IST) on August 11, TASS news agency reported.

Russia’s Luna Lander mission, which launched on August 11 was expected to be on the Moon’s South Pole along with India’s Chandrayaan-3. However,  during its descent, Luna 25 experienced an anomaly that caused it to impact the surface of the Moon on August 19.

Roscosmos, Russia’s space agency, published an estimate of the impact point on August 21. 

LRO’s most recent “before” image of the area was captured in June 2022; thus, the new crater formed sometime after that date. Since this new crater is close to the Luna 25 estimated impact point, the LRO team concludes it is likely to be from that mission, rather than a natural impactor.

ALSO READ:  ISRO team travels to Tirumala before Chandrayaan-3's launch

“The new crater is about 10 metres in diameter and is located at 57.865 degrees south latitude and 61.360 degrees east longitude at an elevation of about minus 360 metres,” NASA said. 

“The impact point was on the steep (greater than 20-degree grade) inner rim of Pontecoulant G crater, about 400 kilometres short of Luna 25’s intended landing point at 69.545 degrees south, 43.544 degrees east,” it added.

Russia aimed to return to the Moon with its Luna 25 lander mission after 47 years. Its last lunar mission, Luna-24 was launched in 1976, during the former Soviet Union period. 

Meanwhile, Roscosmos has planned Luna-26 for 2027 and Luna-27 for 2028, Luna-28 in 2030 or later. The country is also aiming at a manned mission and the construction of a lunar base, along with other countries such as the US, India and China.

Continue Reading

Space

Countdown for India’s rocket mission to the Sun begins at 12.20 pm

Published

on

By

Aditya L1 Sun Mission
Aditya L1 Sun Mission

Chennai, Sep 1 (IANS) The countdown for the Saturday morning launch of India’s third interplanetary mission — this time to the Sun – Aditya-L1 — will begin at 12.20 p.m. on Friday, said a senior official of Indian Space Research Organisation (ISRO).

“The countdown will begin at 12.20 p.m. today (Friday),” the official told IANS.

Interestingly, India on August 23 reached the Moon with its lander safely landing on the lunar soil in a textbook style. Later the rover rolled down and started doing experiments.

The Aditya-L1 — named after the Sun God in Hindu mythology — will be carried by the Indian rocket Polar Satellite Launch Vehicle-XL variant (PSLV-XL). On Saturday, the rocket will blast off at 11.50 a.m. from the Sriharikota rocket port in Andhra Pradesh, the ISRO said.

During the countdown process, the fuelling of the rocket — liquid fuel — will be done as well as checking of its systems.

Initially, Aditya-L1 will be ejected in a low earth orbit (LEO). Then the orbit will be elliptical. As the spacecraft travels towards L1, it will exit the earth’s gravitational Sphere of Influence (SOI).

After exit from SOI, the cruise phase will start and subsequently the spacecraft will be injected into a large halo orbit around the Lagrange Point (L1) — the point where the gravitational pull of two large bodies will be equal and hence the spacecraft will not gravitate towards any one of the planet.

The total travel time from launch to L1 would take about four months for Aditya-L1 and the distance will be about 1.5 million km from the Earth.

ALSO READ:  Parker Solar Probe makes sixth Venus flyby on way to Sun

The distance between the Earth and the Moon is about 3,84,000 km.

“A satellite placed in the halo orbit around the L1 point has the major advantage of continuously viewing the Sun without any occultation/eclipses.

This will provide a greater advantage of observing the solar activities and its effect on space weather in real time,” the ISRO said.

According to the ISRO, the spacecraft carries seven payloads to observe the photosphere, chromosphere, and the outermost layers of the Sun (the corona) using electromagnetic and particle and magnetic field detectors.

“Using the special vantage point L1, four payloads directly view the Sun and the remaining three payloads carry out in-situ studies of particles and fields at the Lagrange point L1, thus providing important scientific studies of the propagatory effect of solar dynamics in the interplanetary medium,” it said.

Aditya-L1’s seven payloads are expected to provide the most crucial information to understand the problem of coronal heating, coronal mass ejection, pre-flare and flare activities and their characteristics, dynamics of space weather, propagation of particle and fields and others, the Indian space agency said.

The ISRO said the major science objectives of Aditya-L1 mission are: Study of solar upper atmospheric (chromosphere and corona) dynamics, study of chromospheric and coronal heating, physics of the partially ionised plasma, and initiation of the coronal mass ejections, and flares.

It will also observe the in-situ particle and plasma environment providing data for the study of particle dynamics from the Sun.

ALSO READ:  James Webb Telescope captures the explosion of a dying Star

Other objectives are physics of solar corona and its heating mechanism, the diagnostics of the coronal and coronal loops plasma: Temperature, velocity and density, development, dynamics and origin of Coronal Mass Ejections (CME), to identify the sequence of processes that occur at multiple layers (chromosphere, base and extended corona) which eventually leads to solar eruptive events, magnetic field topology and magnetic field measurements in the solar corona, and the drivers for space weather (origin, composition and dynamics of solar wind).

The Indian space agency said that the Sun estimated to be 4.5 billion years old is a hot glowing ball of hydrogen and helium gases and is the source of energy for the solar system. “The gravity of the sun holds all the objects of the solar system together. At the central region of the sun, known as ‘core’, the temperature can reach as high as 15 million degree Celsius,” it said.

At this temperature, a process called nuclear fusion takes place in the core which powers the Sun. The visible surface of the sun known as photosphere is relatively cool and has a temperature of about 5,500 degree Celsius, the ISRO said.

The sun is the nearest star and therefore can be studied in much more detail as compared to other stars. By studying the sun, we can learn much more about stars in our Milky Way as well as about stars in various other galaxies, the ISRO said.

ALSO READ:  Maha leaders cheer conquest of moon, laud ISRO scientists

The Sun is a very dynamic star that extends much beyond what we see. It shows several eruptive phenomena and releases immense amount of energy in the solar system. If such explosive solar phenomena is directed towards the earth, it could cause various types of disturbances in the near earth space environment.

Various spacecraft and communication systems are prone to such disturbances and therefore an early warning of such events is important for taking corrective measures beforehand.

In addition to these, if an astronaut is directly exposed to such explosive phenomena, he/she would be in danger. The various thermal and magnetic phenomena on the sun are of extreme nature. Thus, the Sun also provides a good natural laboratory to understand those phenomena which cannot be directly studied in the lab.

The Indians space agency said all the seven payloads carried by Aditya-L1 are indigenously developed by different laboratories in the country in close coordination with it.

The Visible Emission Line Coronagraph (VELC) instrument is developed at the Indian Institute of Astrophysics, Bangalore; Solar Ultra-violet Imaging Telescope (SUIT) instrument at Inter University Centre for Astronomy & Astrophysics, Pune; Aditya Solar wind Particle Experiment (ASPEX) at Physical Research Laboratory, Ahmedabad; Plasma Analyser Package for Aditya (PAPA) at Space Physics Laboratory, Vikram Sarabhai Space Centre, Thiruvananthapuram; Solar Low Energy X-ray Spectrometer (SoLEXS) and High Energy L1 Orbiting X-ray Spectrometer (HEL1OS) payloads at U R Rao Satellite Centre, Bangalore and the Magnetometer at the Laboratory for Electro Optics Systems, Bengaluru.

Continue Reading

Space

ISRO scientists offer prayers at Tirumala ahead of Aditya L1 launch

Published

on

By

ISRO Aditya L1 Mission

Tirupati, Sep 1 (IANS) Ahead of the crucial launch of Aditya L1 mission, aimed at studying the Sun, scientists of the Indian Space Research Organisation (ISRO) offered prayers at Tirumala temple here on Friday

The scientists from the space agency visited Sri Venkateswara temple atop Tirumala Hills in the morning.

They prayed for the success of the mission, which is scheduled to be launched on September 2 at 11.50 a.m. from the Sriharikota spaceport in Andhra Pradesh.

Aditya L1 spacecraft is designed for providing remote observations of the solar corona and in situ observations of the solar wind at L1 (Sun-Earth Lagrangian point), which is about 1.5 million kilometres from the earth.

The first space-based Indian observatory to study the Sun would be launched by PSLV-C57 rocket.

It’s a common practice for the ISRO scientists to offer prayers at the famous hill shrine ahead of major missions.

In July, they performed puja at the temple ahead of the launch of  Chandrayaan-3.

ALSO READ:  Prez, V-P congratulate nation on successful Chandrayaan-3 landing

The Moon mission scripted history by successfully landing on the lunar surface on August 23. India became the only country to accomplish soft landing on the Moon’s South Pole.

Continue Reading

Space

ISRO Chairman offers prayers for success of Aditya L1

Published

on

By

ISRO Chairman offers prayers
ISRO Chairman offers prayers for Success of Aditya L1 Mission

Tirupati (Andhra Pradesh), Sep 1 (IANS) The Chairman of Indian Space Research Organisation (ISRO), S. Somanath, on Friday offered prayers at a temple near the Satish Dhawan Space Centre, Sriharikota, for the success of India’s rocket mission to the Sun.

Ahead of the crucial launch of the Aditya L1 mission scheduled on Saturday, aimed at studying the Sun, Somanath offered prayers at the Chengalamma Parameshwari temple near the spaceport.

“I came here to pray to Chengalamma Parameshwari for giving us strength to make this launch successful,” he told reporters after offering prayers.

Earlier, a group of ISRO scientists had offered prayers at the Tirumala temple on Friday morning.

Somanath said the countdown has started for the PSLV-C57 Aditya-L1 mission, which will be launched at 11.50 a.m. on Saturday.

“It will take almost an hour for the satellite to reach the required location and inject. The Aditya L1 mission is to study the Sun. It will take another 125 days to travel from Earth to the L1 point from where the satellite will look at the Sun,” he said.

ALSO READ:  Chandrayaan-3 success: K’taka CM congratulates ISRO chief, Deputy CM felicitates team

Replying to another query, the ISRO chief said the date for Chandrayaan-4 has not been decided yet.

“We will announce soon. Something is there,” he said with a smile.

On the Chandrayaan-3 mission, Somanath said that lunar rover Pragyan is working very well, moving around the Moon and doing rotations which will go on till September 3.

Earlier, some scientists from the space agency visited the Sri Venkateswara temple atop Tirumala hills on Friday morning and prayed for the success of the Aditya L1 mission .

The Aditya-L1 spacecraft is designed for providing remote observations of the solar corona and in situ observations of the solar wind at L1 (Sun-Earth Lagrangian point), which is about 1.5 million km from the Earth.

The first space-based Indian observatory to study the Sun would be launched by a PSLV-C57 rocket.

It’s a common practice for the ISRO scientists to offer prayers at the famous hill shrine ahead of major missions.

ALSO READ:  Chandrayaan-3 makes its final manoeuvre and flies to the moon

In July, they had performed ‘puja’ at the temple with a miniature model of Chandrayaan-3.

The Moon mission scripted history by successfully landing on the lunar surface on August 23, as India became the only country to accomplish soft landing on the Moon’s South Pole.

Continue Reading

Space

NASA prepares for delivery of asteroid sample by OSIRIS-REx in Sept

Published

on

By

NASA OSIRIS-REx Asteroid sample
NASA OSIRIS-REx Asteroid sample

Washington, Aug 31 (IANS) A team of NASA scientists is in the final stages of preparing for the arrival of the first US asteroid sample — slated to land on Earth in September on OSIRIS-REx spacecraft.

OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer), the first US mission to collect a sample from an asteroid, will return to Earth on September 24 with material from asteroid Bennu. It is carrying an estimated 8.8 ounces of rocky material collected from the surface of the asteroid Bennu in 2020. 

A mockup of an OSIRIS-REx sample capsule was dropped on Wednesday from an aircraft and landed at the drop zone at the Department of Defense’s Utah Test and Training Range in the desert outside Salt Lake City. This was part of the mission’s final major test prior to the arrival of the actual capsule.

“We are now mere weeks away from receiving a piece of solar system history on Earth, and this successful drop test ensures we’re ready,” said Nicola Fox, associate administrator of NASA’s Science Mission Directorate in Washington, in a statement. 

ALSO READ:  'Chandrayaan-3 success big step in space exploration', Putin hails India

“Pristine material from asteroid Bennu will help shed light on the formation of our solar system 4.5 billion years ago, and perhaps even on how life on Earth began,”Fox added.

This drop test follows a series of earlier rehearsals — capsule recovery, spacecraft engineering operations, and sample curation procedures — conducted earlier this spring and summer.

Now, with less than four weeks until the spacecraft’s arrival, the OSIRIS-REx team is nearing the end of rehearsals and ready for the actual delivery.

The asteroid sample will help researchers to learn about how our planet and solar system formed, as well as the origin of organics that may have led to life on Earth.

Travelling about 27,650 mph, OSIRIS-REx is expected to enter Earth’s atmosphere at 10:42 a.m. EDT (8:12 pm IST) on September 24.  

“We are now in the final leg of this seven-year journey, and it feels very much like the last few miles of a marathon, with a confluence of emotions like pride and joy coexisting with a determined focus to complete the race well,” said Rich Burns, project manager for OSIRIS-REx at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.

ALSO READ:  Union cabinet lauds success of Chandrayan-3 mission, appreciates role of ISRO

Once retrieved, the sample will be documented, cared for, at NASA’s Johnson Space Center in Houston, and later distributed for analysis to scientists worldwide.

Continue Reading

Trending